Breadboard Panels

Breadboard Panels
Breadboard panels are 3D printed adapter panels that lock into a breadboard base holder. The panels hold switches, potentiometers, displays, connectors, batteries, etc. securely to the breadboard assembly. Breadboard panels greatly improve breadboard project portability and durability.

Download All 3D Print Files
Individual files may be downloaded below.

Locking Technology
The panels have feet that lock into the base, then a wedge holds them in place. No tools are required, although needle nose pliers make removing the wedges easier. The panels are removable and reusable any number of times.

Exact dimensions for 3D printing your own custom panels:

The panel thickness is 2mm.

Breadboard Bases

Three base sizes are available. The breadboard panels fit any base.

Library of Breadboard Panels
 

Arduino Panel 3D print file For Arduino UNO, Arduino Mega2560.

8 Digit 7 Segment Panel 3D print file For common 0.36" MAX7219 7-segment module.

4 by 8 Digit 7 Segment Panel 3D print file For common 0.36" MAX7219 7-segment module.

JY-LKM1638 Switch/LED Panel 3D print file For common TM1638 module "JY-LKM1638".

QYF-TM1638 Switch/LED Panel 3D print file For common TM1638 module "QYF-TM1638".

LED--KEY Switch/LED Panel 3D print file For common module "LED--KEY".

Tiny Voltmeter Panel 3D print file: Single Meter 3D print file: Dual Meters For common digital voltmeter modules.

Dual Voltmeter Panel 3D print file For common digital voltmeter modules.

V-A Meter Panel 3D print file For common digital V-A Meter module.

320x240 LCD Panel Portrait 3D print file For 2.8" LCD panel.

320x240 LCD Panel Landscape 3D print file For 2.8" LCD panel.

OLED Panel 3D print file For 0.9" OLED panel.

OLED Panel 3D print file For 1.3" OLED panel.

Multipurpose Panel 3D print file

Multipurpose Panel 3D print file

Triple Potentiometer 3D print file

Single Potentiometer 3D print file

4 Switches 3D print file

USB Power Panel 3D print file For common Micro-USB breakout module, plus power switch.

Banana Power Panel 3D print file Banana jacks with power switch.

9V Battery Panel 3D print file

Variable Buck-Boost PSU Panel 3D print file General purpose power supply. For ZK-4KX PSU module. Uses (2) 18650 batteries. Output 0.5-30V.

Variable Buck PSU Panel 3D print file Servo power supply. Uses 18650 batteries. Output 3-6V.

18650 Battery Panel 3D print file Fits 18650 batteries.

5V 1A UPS Panel 3D print file - Main Panel 3D print file - Retainer For ETA9640 module. Uses (1) 18650 battery. Output 5V 1A.

Dual Voltage PSU Panel 3D print file For DIYmore module. Uses (1) 18650 battery. Output: 5V 2A Output: 3.3V 1A

RJ45 Connector 3D print file

RJ11 Connector 3D print file

Antenna Mount 3D print file Dual antenna mount. Also good for switches, buttons, etc.

Speaker Panel 3D print file Speaker Grille

Servo Panel 3D print file For SG-90 servo.

Helping Hand 3D print file Helping Hand.

Helper Panel 3D print file General purpose tie down.

Handle 3D print file For picking up the breadboard.

Blank Panels 30mm Blank Panel 45mm Blank Panel 60mm Blank Panel 75mm Blank Panel 90mm Blank Panel

Still Want More?

Join two bases to make an extra big breadboard panel base.

Joiner Handle 3D print file Joins two double breadboard bases.

Give your breadboard wheels.

Wheel Mounts High ground clearance for off-road breadboarding. 3D print file Left 3D print file Right For common gearmotor wheels.

A Double Decker Breadboard Rover

Riser Handle Join two full size breadboard bases. 3D print file For full size double breadboard base only. Uses (4) #6 heat set inserts.

Breadboard Bot
Using panels for Arduino UNO with RGBduino 5x8 addressable LED shield, Arduino Mega 2560 with motor driver shield, speaker, ultrasonic distance sensor, antennas, 4 wheel drive, power switch, and two power supplies. ESP32-CAM with pan-tilt is bolted to a riser handle. MP3 player and CH12 radio transceiver modules are on the breadboard.